|Power Requirements||AC: 220-240V 50/60Hz, DC: 24v (2×12V Car Battery)|
|MIC INPUT (Impedance/Gain)||2kΩ/62dB|
|LINE INPUT (Impedance/Gain)||20kΩ Balanced/42dB, 10kΩ Unbalanced/42dB|
|Frequency Response||30Hz – 20kHz (+0, -1dB)|
|Tone Controls||Bass : ±12dB at 100Hz, Mid : ±12dB at 2kHz, Treble : ± 12dB at 10kHz|
|Line Output LO||-10dBm/+2dBm (200mV/1V)|
|Line Output HI||0dBm/+17dBm (775mV/5.5V)|
|ECHO/Reverb System||Digital Signal Processing|
|Signal to Noise Ratio||>70dB (0dBm, 0.775V)|
|Dimensions||W633 × H93 × D420 mm|
AHUJA AMX-1412 MIXER PA AUDIO MIXING CONSOLE – STEREO
AC & 24V DC Operation
Input Channels : Each Channel has separate 1/4″ balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
AUX Control : This controls the level of the channel in the final mix to Aux Send output.
AUX Send & AUX Return : These have been provided for sending the pre-fader output of channels for monitoring or for adding a Special Effects Unit.
MONO/STEREO Output : Mono output is available from either Left & Right output jacks when the switch is in ‘Mono’ position.
Each channel has GAIN, BASS, MID, TREBLE, ECHO, PAN and slide LEVEL controls with CLIP LED indicator.
Echo section provided with Delay, Repeat & Level controls. Tape section for Record & Playback facility.
|Dimensions||420 x 633 x 93 mm|