24,821  22,339 incl GST

Report Abuse

Report an abuse for product AHUJA UBA-800 AMPLIFIER DJ AND PA AMPLIFIER

SKU: UBA-800_(HSN/SAC:85184000) Category:
Power Output 1150W RMS Max., 800W RMS at 10%THD, 770W RMS at 5% THD 725W RMS at 2% THD
Output Regulation ≤ 2dB, no load to full load at 1kHz
Input Channels 1 × Mic 1mV / 4.7kΩ, 1 × Aux 100mV / 470kΩ, 1 × Aux 250mV / 20kΩ, 1 × CD 250mV / 20kΩ, 1 × Line 1V / 10kΩ
Frequency Response 50Hz–18,000Hz ±3dB
Signal to Noise Ratio 60dB
Tone Controls Bass (100Hz) : ± 8dB, Lo-Mid (315Hz) : ± 8dB, Mid (1kHz) : ± 8dB, Hi-Mid (3.1kHz) : ± 8dB, Treble (10kHz) : ± 8dB
Line Output 1V/1kΩ
Speaker Output 2Ω, 4Ω  & 8Ω
Power Supply AC: 220-240V 50/60Hz
Protections 2 × 25 Amp fuse in ± DC supply 8 Amp circuit breaker in AC mains, Protected against high AC mains voltage, overload & temperature
Power Consumption 1500 VA
Dimensions W482 × H186 × D530 mm
Weight 32.0kg




AC Operation

Designed for use in a wide variety of PA applications and DJ performances.
UBA-800 is a 800 Watts amplifier which can be connected to various input sources like a Microphone, PA Mixer, DJ Mixer, CD Player, Cassette Player, Keyboard etc.
The amplifier includes an built-in 5 Band Graphic Equalizer with tone ON/OFF switch which enables precise and accurate tonal setting of the programme.
Line Input and Line Output have been provided to enable interconnections with other power amplifiers.
Circuit Protector Device has been provided which safeguards the amplifier against overload and short circuit.
The amplifier has built-in protection against over voltage in AC mains supply which is specially useful while operating on a Genset.
Indicator LEDs for Power, Signal, Temp, Overload and Fault conditions have been provided.
2Ω speaker matching provided in addition to 4 & 8Ω.



Ahuja top products

Additional information

Weight 32 kg
Dimensions 530 x 482 x 186 mm